Co2 RF laser marking machine is carbon dioxide laser marking machine (CO2 is carbon dioxide). It is a laser galvanometer marking machine using CO2 gas as the working medium. The CO2 laser uses CO2 gas as the medium, charges CO2 and other auxiliary gases i
This stainless steel pin mills adopts the tooth disc high-speed rotating knife, the fixed knife impact and shear grinding to crush. The crushing effect is good, the heat of crushing chamber and finished product outflow together from sieve by strong airflo
The diameter range of the finished wire drawn products of the horizontal wire drawing machine is 6.5-24mm. Its working characteristics are non-slip wire drawing and the wire drawn has a large diameter. Its production line draws wires with good linearity a
Boltless steel shelving is called metal boltless rack, the column is angle steel upright, the beam is Z type, it use wooden panel or steel panel, easily assembled, the height of each layer (mostly) can be adjusted freely every 38.1mm.
1325 cnc router have 1300*2500mm working table, some also called 4*8ft, it is a good choice for MDF, solid wood, plywood, fiberboard, acrylic etc. cutting and engraving. For cabinet door, non-paint door, panel furniture, 3d stencil technology, wave board
DGA Plastic Shredder compact design for small footprint 1.Product Introduction The Compact Single Shaft Shredder has a 251mm diameter profiled rotor made of solid steel, operating at a speed of 11.6~12.9rpm. The concave ground, aggressive 4-way rotating k
Solid Wiring Duct with snap-on cover features reducing cable strain. Designed with a series of slotted fingers on each side of the duct and pass-through holes on the back, the wire duct raceway enables you to route your cables where needed.